AidSpace Blog

All in a Late Day's/Night's Work

Posted on

The National Air and Space Museum contains some of the largest artifacts in the world, which presents many unique challenges for handling  and displaying.  It is up to a small group of individuals, comprised of Collections and Restoration staff, to ensure artifacts are cared for and not damaged.  Carrying out these duties are neither easy or for the faint of heart as we frequently utilize heavy equipment, such as forklifts, basket and scissor lifts, cranes, etc., within inches of the artifact.  Working with less than an inch is typical as well.

Additionally, as the National Air and Space Museum has so many oversized artifacts in its collection, we operate our own tractor trailer to support the museum’s 3 locations.  Those who voluntarily operate the museum’s rig take on additional risks and liabilities as many more things can go wrong while loading and transporting an artifact.  This is especially the case when a load is oversized.  Despite being nerve racking at times, moving artifacts is usually an exhilarating experience.

One challenging move happened this past December.  Collections had to transport a Beechcraft D18S (a twin engine airplane) to the Stephen F. Udvar-Hazy Center in Chantilly, VA.  Due to its size, being 18 feet wide with the wings removed, meant it would have to travel at night with special hauling permits.  To make the move happen a lot of people and agencies were involved and coordinated with.  Besides numerous departments within the Museum, agencies such as Maryland’s State Highway Administration, Maryland State Police, Virginia Dept. of Transportation, Virginia State Police, and the Virginia Dept. of Motor Vehicles also need to be contacted.    Needless to say, any deviation from our original mission plan would be time consuming to change.

01 Loading

Loading the Beechcraft D18S at the Museum's Paul E. Garber Preservation, Restoration and Storage Facility in Suitland, MD

The day before the move date we loaded the airplane onto the trailer and made sure it was thoroughly secured and well marked/visible.

02 Pre-departure

Just before departure from the Garber Facility.

Despite being 18 feet wide, well marked, having escort vehicles complete with flashing lights, and taking up two full lanes, it is amazing with how many drivers did not keep a safe distance.  Thankfully the transport went well and we arrived at the Stephen F. Udvar-Hazy Center safe, albeit tired.  We pulled the tractor/trailer/plane inside to unload, which was nice as it was cold outside.

03 Arrival

Moving the Beechcraft D18S into the Udvar-Hazy Center through the giant south end door.

04 Unload

Offloading the Beechcraft D18S from the tractor trailor with one of the Museum's large cranes.

After unloading the Beech we rolled it into a staging area.  Over the next few days the wings were reattached and the aircraft was raised into the air, where it now resides.

WEB11108-2008_640

Douglas Erickson is a museum specialist in the Collections Processing Unit of the National Air and Space Museum.


One thought on “All in a Late Day's/Night's Work

  1. I’ve visited the Air and Space Museum so many times, and i will keep on visiting it. it always fascinates to see all the artifacts, and all those huge airplanes and space shuttles, missiles et al.
    definitely one of my top 3 museums!

Leave a Reply

Your email address will not be published. Required fields are marked *


9 × = fifty four